smb_setup
Linux 配置 Samba 共享服务
一键脚本
bash <(curl -sL gitee.com/meimolihan/cmdbox/raw/master/sh/smb_setup.sh)
bash <(curl -sL ../sh/smb_setup.sh)
效果预览
补充说明
该脚本用于在 Linux 系统上交互式配置 Samba 共享服务，通过逐项提示完成安装、用户创建、密码设置、目录权限修复和服务启动，最终输出完整的访问信息。
功能特点
- 自动检测并安装 Samba 服务端软件包（支持 apt/yum/dnf/pacman/zypper）
- 交互式设置共享目录路径（默认为 /mnt，支持绝对路径验证）
- 交互式创建或选择现有系统用户作为 Samba 用户
- 自动创建系统用户（useradd -m -s /sbin/nologin）并校验用户名格式
- 多方案 Samba 密码设置（smbpasswd / pdbedit 自动降级，含密码确认和长度校验）
- 空密码提示和二次确认（不推荐，但有备选逻辑）
- Samba 密码设置失败自动修复（清空 passdb.tdb 数据库重试）
- 交互式共享名称设置（检测冲突，支持覆盖已有共享段）
- Samba 配置完整性检查和自动修复（创建最小配置文件，testparm 验证）
- 自动备份原始 smb.conf 并追加共享段配置
- 防火墙规则自动配置（UFW / firewalld / iptables 多方案降级）
- 配置后自动启动并启用 smbd 和 nmbd 服务
- 修复共享目录权限（chown/chmod，支持 ACL setfacl）
- 显示完整的访问信息（IP、路径、共享名、访问命令）
输出说明
脚本输出包含以下字段：
| 字段 | 说明 |
|---|---|
| Samba 安装检查 | 检查并安装 Samba 服务端软件包 |
| Samba 配置检查 | 检查 smb.conf 完整性，自动备份并修复 |
| 共享目录 | 显示用户输入的共享目录路径 |
| Samba 用户 | 显示创建或选择的系统用户 |
| Samba 密码状态 | 显示密码设置结果（成功/失败/空密码） |
| 共享名称 | 显示最终设置的共享名称 |
| 配置更新 | 显示 smb.conf 配置追加和 testparm 验证结果 |
| 防火墙配置 | 显示 UFW/firewalld/iptables 规则配置状态 |
| 服务启动 | 显示 smbd/nmbd 服务启动和启用结果 |
| 访问地址 | 显示 Windows/Linux/Mac 访问命令和测试命令 |
注意事项
- 脚本需要 root 权限或 sudo 权限来安装软件包、修改系统配置和重启服务
- 共享目录默认为 /mnt，需以 / 开头，支持自动创建（mkdir -p）
- 如果目录已存在但不是目录类型（如文件），脚本会报错并重新提示
- Samba 用户名校验格式：仅支持小写字母、数字、下划线和连字符，且必须以字母或下划线开头
- 对于不存在的用户，脚本会提示是否自动创建（useradd -m -s /sbin/nologin）
- 密码长度至少 3 位，空密码需二次确认（不推荐生产环境使用）
- 如果 smbpasswd 设置失败，脚本自动尝试 pdbedit 降级；仍失败时清空 passdb.tdb 数据库重试
- 原始 smb.conf 自动备份为 /etc/samba/smb.conf.bak（首次）和带时间戳的备份文件
- 共享段配置写入前使用 testparm 验证语法，验证失败自动从备份恢复
- 防火墙自动检测顺序：UFW → firewalld → iptables，Samba 端口为 139/445（TCP）和 137/138（UDP）
- 脚本依赖 hostname -I 和 ip route 获取 IP，失败则回退到 ifconfig.me
- 如果系统不支持 systemctl，回退到 service 命令管理服务
- 密码设置完全失败时仍可选择继续配置共享（可后续手动设置密码）
脚本源码
#!/bin/bash
set -uo pipefail
list_color_init() {
export gl_hui=$'\033[38;5;59m'
export gl_hong=$'\033[38;5;9m'
export gl_lv=$'\033[38;5;10m'
export gl_huang=$'\033[38;5;11m'
export gl_lan=$'\033[38;5;32m'
export gl_bai=$'\033[38;5;15m'
export gl_zi=$'\033[38;5;13m'
export gl_bufan=$'\033[38;5;14m'
export gl_cheng=$'\033[38;5;208m'
export reset=$'\033[0m'
}
list_color_init
log_info() { echo -e "${gl_lan}[信息]${gl_bai} $*"; }
log_ok() { echo -e "${gl_lv}[成功]${gl_bai} $*"; }
log_warn() { echo -e "${gl_huang}[警告]${gl_bai} $*"; }
log_error() { echo -e "${gl_hong}[错误]${gl_bai} $*" >&2; }
break_end() {
echo -e "${gl_lv}操作完成${gl_bai}"
echo -e "${gl_bai}按任意键继续 ${gl_hong}.${gl_huang}.${gl_lv}.${gl_bai}\c"
read -r -n 1 -s -r -p ""
echo ""
clear
}
sleep_fractional() {
local seconds=$1
if sleep "$seconds" 2>/dev/null; then return 0; fi
if command -v perl >/dev/null 2>&1; then perl -e "select(undef, undef, undef, $seconds)"; return 0; fi
if command -v python3 >/dev/null 2>&1; then python3 -c "import time; time.sleep($seconds)"; return 0; fi
if command -v python >/dev/null 2>&1; then python -c "import time; time.sleep($seconds)"; return 0; fi
local int_seconds=$(echo "$seconds" | awk '{print int($1+0.999)}')
sleep "$int_seconds"
}
cancel_return() {
local menu_name="${1:-上一级选单}"
local frames=("⠋" "⠙" "⠹" "⠸" "⠼" "⠴" "⠦" "⠧" "⠇" "⠏")
local dots=(
"${gl_hong}."
"${gl_huang}."
"${gl_lv}."
"${gl_bufan}."
"${gl_zi}."
"${gl_cheng}."
)
local dot_buffer=""
local frame_len=${#frames[@]}
local dot_idx=0
local total_dots=6
for ((i=0; i<20; i++)); do
if (( i > 0 && i % 3 == 0 && dot_idx < total_dots )); then
dot_buffer+=${dots[$dot_idx]}
((dot_idx++))
fi
echo -ne "\r\033[K${gl_bufan}${frames[i % frame_len]}${gl_bai}即将返回 ${gl_huang}${menu_name} ${dot_buffer}"
sleep_fractional 0.06
done
echo -e "\r\033[K${gl_lv}✓${gl_bai} 成功返回${gl_huang}${menu_name}${gl_bai} \n"
clear
}
exit_animation() {
local frames=("⠋" "⠙" "⠹" "⠸" "⠼" "⠴" "⠦" "⠧" "⠇" "⠏")
local dots=(
"${gl_hong}."
"${gl_huang}."
"${gl_lv}."
"${gl_bufan}."
"${gl_zi}."
"${gl_cheng}."
)
local dot_buffer=""
local frame_len=${#frames[@]}
local dot_idx=0
local total_dots=6
for ((i=0; i<20; i++)); do
if (( i > 0 && i % 3 == 0 && dot_idx < total_dots )); then
dot_buffer+=${dots[$dot_idx]}
((dot_idx++))
fi
echo -ne "\r\033[K${gl_bufan}${frames[i % frame_len]}${gl_bai} 正在退出 ${dot_buffer}"
sleep_fractional 0.06
done
echo -e "\r\033[K${gl_lv}✓${gl_bai} 成功退出\n"
clear
}
config_samba_share() {
local share_dir samba_user samba_pass share_name
local ip_address user_created
local samba_pass_confirm
install_samba() {
log_info "正在检查并安装 Samba 服务 ${gl_hong}.${gl_huang}.${gl_lv}.${gl_bai}"
if command -v smbd &>/dev/null && command -v nmbd &>/dev/null; then
log_ok "Samba 已安装，跳过安装步骤"
return 0
fi
if command -v apt &>/dev/null; then
apt update && apt install samba samba-common-bin -y
elif command -v yum &>/dev/null; then
yum install samba samba-client samba-common -y
elif command -v dnf &>/dev/null; then
dnf install samba samba-client samba-common -y
elif command -v pacman &>/dev/null; then
pacman -S samba --noconfirm
elif command -v zypper &>/dev/null; then
zypper install samba samba-client -y
else
log_error "不支持的包管理器，请手动安装 Samba"
return 1
fi
clear
echo -e "${gl_zi}>>> 检查Samba配置${gl_bai}"
echo -e "${gl_bufan}————————————————————————————————————————————————${gl_bai}"
if [ $? -eq 0 ]; then
log_ok "Samba 服务安装完成"
return 0
else
log_error "Samba 安装失败"
return 1
fi
}
check_samba_config() {
log_info "检查Samba配置完整性 ${gl_hong}.${gl_huang}.${gl_lv}.${gl_bai}"
if [ ! -f "/etc/samba/smb.conf.bak" ]; then
cp -f /etc/samba/smb.conf /etc/samba/smb.conf.bak 2>/dev/null
fi
if ! testparm -s /etc/samba/smb.conf 2>&1 | grep -q "Loaded services file OK"; then
log_warn "Samba配置存在问题，创建基本配置"
cat >/etc/samba/smb.conf <<'EOF'
[global]
workgroup = WORKGROUP
log file = /var/log/samba/log.%m
max log size = 1000
logging = file
panic action = /usr/share/samba/panic-action %d
server role = standalone server
obey pam restrictions = yes
unix password sync = yes
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
pam password change = yes
map to guest = bad user
usershare allow guests = yes
[homes]
comment = Home Directories
browseable = no
read only = yes
create mask = 0700
directory mask = 0700
valid users = %S
[printers]
comment = All Printers
browseable = no
path = /var/tmp
printable = yes
guest ok = no
read only = yes
create mask = 0700
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
EOF
log_ok "已创建基本Samba配置"
fi
if testparm -s /etc/samba/smb.conf &>/dev/null; then
log_ok "Samba配置语法正确"
echo -e "${gl_bufan}————————————————————————————————————————————————${gl_bai}"
return 0
else
log_error "无法修复Samba配置，请手动检查"
echo -e "${gl_bufan}————————————————————————————————————————————————${gl_bai}"
return 1
fi
}
init_samba_db() {
log_info "初始化Samba用户数据库 ${gl_hong}.${gl_huang}.${gl_lv}.${gl_bai}"
mkdir -p /var/lib/samba/private
mkdir -p /var/log/samba
if command -v systemctl &>/dev/null; then
systemctl restart smbd nmbd 2>/dev/null
fi
sleep_fractional 2
return 0
}
set_samba_password() {
local user="$1"
local pass_set=false
if ! id "$user" &>/dev/null; then
log_error "系统用户 '$user' 不存在"
return 1
fi
if ! check_samba_config; then
return 1
fi
init_samba_db
while true; do
echo
read -r -s -p "$(echo -e "${gl_bai}为 ${gl_huang}$user${gl_bai} 设置Samba密码: ")" samba_pass
echo
if [[ -z "$samba_pass" ]]; then
read -r -p "$(echo -e "${gl_huang}密码为空，是否继续? (${gl_lv}y${gl_bai}/${gl_hong}N${gl_bai}): ")" empty_pass
[[ $empty_pass =~ ^[Yy]$ ]] && {
samba_pass=""
break
}
continue
fi
read -r -s -p "$(echo -e "${gl_bai}请确认密码: ")" samba_pass_confirm
echo
if [[ "$samba_pass" != "$samba_pass_confirm" ]]; then
log_error "两次输入的密码不一致，请重新输入！"
elif [[ ${#samba_pass} -lt 3 ]]; then
log_error "密码长度至少3位！"
else
pass_set=true
break
fi
done
if $pass_set; then
log_info "正在设置Samba用户密码 ${gl_hong}.${gl_huang}.${gl_lv}.${gl_bai}"
local password_set=false
if [[ -n "$samba_pass" ]]; then
if echo -e "$samba_pass\n$samba_pass" | smbpasswd -a -s "$user" 2>/dev/null; then
password_set=true
elif command -v pdbedit &>/dev/null; then
if (
echo "$samba_pass"
echo "$samba_pass"
) | pdbedit -a -u "$user" 2>/dev/null; then
password_set=true
fi
else
if smbpasswd -a "$user" <<EOF; then
$samba_pass
$samba_pass
EOF
password_set=true
fi
fi
if $password_set; then
log_ok "Samba 用户 '${gl_lv}$user${gl_bai}' 密码已设置"
else
log_warn "标准方法失败，尝试修复数据库"
systemctl stop smbd nmbd 2>/dev/null
rm -f /var/lib/samba/private/passdb.tdb
systemctl start smbd nmbd 2>/dev/null
sleep_fractional 2
if echo -e "$samba_pass\n$samba_pass" | smbpasswd -a -s "$user" 2>/dev/null; then
log_ok "Samba 用户 '${gl_lv}$user${gl_bai}' 密码已设置（修复后）"
password_set=true
else
log_error "设置Samba密码失败"
echo -e "${gl_bai}请手动执行以下命令:"
echo -e "${gl_huang} smbpasswd -a $user${gl_bai}"
return 1
fi
fi
else
if smbpasswd -a "$user" <<<$'\n\n' 2>/dev/null; then
smbpasswd -n "$user" 2>/dev/null
log_warn "Samba 用户 '${gl_lv}$user${gl_bai}' 已设置为空密码访问（不推荐）"
password_set=true
fi
fi
if $password_set; then
if pdbedit -L 2>/dev/null | grep -q "^$user:" || smbpasswd -e "$user" 2>/dev/null; then
log_ok "Samba 用户 '${gl_lv}$user${gl_bai}' 已成功添加到数据库"
return 0
else
log_warn "用户可能未正确添加，但继续配置"
return 0
fi
else
return 1
fi
fi
return 0
}
configure_firewall() {
if command -v ufw &>/dev/null && ufw status | grep -q "active"; then
log_info "配置 UFW 防火墙规则"
ufw allow samba 2>/dev/null && log_ok "UFW 规则已添加"
ufw reload 2>/dev/null && log_ok "UFW 规则已重新载入"
elif command -v firewall-cmd &>/dev/null && systemctl is-active firewalld &>/dev/null; then
log_info "配置 firewalld 防火墙规则"
firewall-cmd --permanent --add-service=samba 2>/dev/null &&
firewall-cmd --reload 2>/dev/null &&
log_ok "firewalld 规则已添加"
elif command -v iptables &>/dev/null; then
log_info "添加 iptables 规则"
iptables -A INPUT -p tcp --dport 139 -j ACCEPT 2>/dev/null
iptables -A INPUT -p tcp --dport 445 -j ACCEPT 2>/dev/null
iptables -A INPUT -p udp --dport 137 -j ACCEPT 2>/dev/null
iptables -A INPUT -p udp --dport 138 -j ACCEPT 2>/dev/null
log_ok "iptables 规则已添加"
fi
}
if ! install_samba; then
return 1
fi
if ! check_samba_config; then
log_error "Samba配置检查失败"
return 1
fi
clear
echo -e "${gl_zi}>>> 设置共享目录${gl_bai}"
echo -e "${gl_bufan}————————————————————————————————————————————————${gl_bai}"
while true; do
read -r -p "$(echo -e "${gl_bai}请输入共享目录路径 (默认为${gl_lv}/mnt${gl_bai})(${gl_huang}0${gl_bai}返回) : ")" share_dir
[[ "$share_dir" == "0" ]] && { cancel_return; return 1; }
share_dir=${share_dir:-/mnt}
share_dir=$(realpath -m "$share_dir" 2>/dev/null || echo "$share_dir")
if [[ ! $share_dir =~ ^/ ]]; then
log_error "目录必须以 / 开头"
continue
fi
if [ -e "$share_dir" ] && [ ! -d "$share_dir" ]; then
log_error "$share_dir 已存在但不是目录"
continue
fi
break
done
mkdir -p "$share_dir" 2>/dev/null || {
log_error "无法创建目录 $share_dir，请检查权限"
return 1
}
chmod 2775 "$share_dir" 2>/dev/null
log_ok "共享目录已创建: $share_dir"
echo -e ""
echo -e "${gl_zi}>>> 设置Samba用户${gl_bai}"
echo -e "${gl_bufan}————————————————————————————————————————————————${gl_bai}"
while true; do
read -r -p "$(echo -e "${gl_bai}请输入Samba用户名 (默认为${gl_lv}$(whoami)${gl_bai})(${gl_huang}0${gl_bai}返回) : ")" samba_user
[[ "$samba_user" == "0" ]] && { cancel_return; return 1; }
samba_user=${samba_user:-$(whoami)}
if [[ ! $samba_user =~ ^[a-z_][a-z0-9_-]*$ ]]; then
log_error "用户名只能包含小写字母、数字、下划线和连字符，且必须以字母或下划线开头"
continue
fi
break
done
user_created=false
if ! id "$samba_user" &>/dev/null; then
read -r -p "$(echo -e "${gl_bai}用户 '$samba_user' 不存在，是否创建? (${gl_lv}y${gl_bai}/${gl_hong}N${gl_bai}): ")" create_user
if [[ $create_user =~ ^[Yy]$ ]]; then
if useradd -m -s /sbin/nologin "$samba_user" 2>/dev/null; then
user_created=true
log_ok "系统用户 '$samba_user' 已创建"
else
log_error "创建用户失败，请检查权限或使用现有用户"
return 1
fi
else
log_error "用户不存在，操作取消"
return 1
fi
else
log_ok "使用现有系统用户: $samba_user"
fi
echo -e ""
echo -e "${gl_zi}>>> 设置Samba密码${gl_bai}"
echo -e "${gl_bufan}————————————————————————————————————————————————${gl_bai}"
is_samba_user() {
pdbedit -L 2>/dev/null | grep -q "^$1:" || smbpasswd -e "$1" 2>&1 | grep -q "Enabled"
}
if is_samba_user "$samba_user"; then
read -r -p "$(echo -e "${gl_bai}用户 '$samba_user' 已经是Samba用户，是否重置密码? (${gl_hong}y${gl_bai}/${gl_lv}N${gl_bai}): ")" reset_pass
if [[ $reset_pass =~ ^[Yy]$ ]]; then
if ! set_samba_password "$samba_user"; then
log_warn "密码重置失败，继续使用原有密码"
fi
else
smbpasswd -e "$samba_user" 2>/dev/null && log_ok "Samba 用户 '${gl_lv}$samba_user${gl_bai}' 已启用，跳过密码设置"
fi
else
if ! set_samba_password "$samba_user"; then
log_error "密码设置失败，但继续配置（可以稍后手动设置）"
read -r -p "$(echo -e "${gl_bai}是否继续配置共享? (${gl_lv}y${gl_bai}/${gl_hong}N${gl_bai}): ")" continue_setup
if [[ ! $continue_setup =~ ^[Yy]$ ]]; then
return 1
fi
fi
fi
echo -e ""
echo -e "${gl_zi}>>> 修复共享目录 $share_dir 读写权限${gl_bai}"
echo -e "${gl_bufan}————————————————————————————————————————————————${gl_bai}"
echo -e "${gl_huang}共享目录 $share_dir 中文件多，需要更多的时间修复，请耐心等待 ${gl_hong}.${gl_huang}.${gl_lv}.${gl_bai}"
chown -R "$samba_user":"$samba_user" "$share_dir" 2>/dev/null
chmod -R 2770 "$share_dir" 2>/dev/null
if command -v setfacl &>/dev/null; then
setfacl -R -m "u:$samba_user:rwx" "$share_dir" 2>/dev/null
setfacl -R -d -m "u:$samba_user:rwx" "$share_dir" 2>/dev/null
fi
echo -e "${gl_lv}共享目录 $share_dir 读写权限修复完成${gl_bai}"
echo -e ""
echo -e "${gl_zi}>>> 设置共享名称${gl_bai}"
echo -e "${gl_bufan}————————————————————————————————————————————————${gl_bai}"
default_share_name=$(basename "$share_dir")
[[ -z $default_share_name || $default_share_name == "/" ]] && default_share_name="share"
while true; do
read -r -p "$(echo -e "${gl_bai}请输入共享名称 (默认为 ${gl_huang}$default_share_name${gl_bai}): ")" input_share
share_name=${input_share:-$default_share_name}
if [[ -z "$share_name" ]]; then
log_error "共享名称不能为空"
continue
fi
if grep -q "\[$share_name\]" /etc/samba/smb.conf 2>/dev/null; then
read -r -p "$(echo -e "${gl_huang}共享名 '$share_name' 已存在，是否覆盖? (${gl_lv}y${gl_bai}/${gl_hong}N${gl_bai}): ")" overwrite
if [[ $overwrite =~ ^[Yy]$ ]]; then
sed -i "/^\[$share_name\]/,/^\[/ { /^\[$share_name\]/d; /^\[/q; d; }" /etc/samba/smb.conf 2>/dev/null
break
else
continue
fi
else
break
fi
done
log_ok "共享名称设置为: $share_name"
echo -e ""
echo -e "${gl_zi}>>> 配置Samba服务${gl_bai}"
echo -e "${gl_bufan}————————————————————————————————————————————————${gl_bai}"
log_info "正在更新Samba配置 ${gl_hong}.${gl_huang}.${gl_lv}.${gl_bai}"
cp /etc/samba/smb.conf /etc/samba/smb.conf.backup.$(date +%Y%m%d_%H%M%S) 2>/dev/null
cat >>/etc/samba/smb.conf <<EOF
[$share_name]
comment = Samba Share Directory
path = $share_dir
browseable = yes
writable = yes
read only = no
guest ok = no
valid users = $samba_user
force user = $samba_user
force group = $samba_user
create mask = 0775
directory mask = 0775
inherit permissions = yes
inherit acls = yes
ea support = yes
store dos attributes = yes
EOF
if testparm -s /etc/samba/smb.conf &>/dev/null; then
log_ok "Samba 配置语法正确"
else
log_error "Samba 配置有误，使用备份恢复"
cp /etc/samba/smb.conf.backup.* /etc/samba/smb.conf 2>/dev/null
return 1
fi
log_info "正在启动Samba服务 ${gl_hong}.${gl_huang}.${gl_lv}.${gl_bai}"
configure_firewall
if command -v systemctl &>/dev/null; then
systemctl enable smbd nmbd 2>/dev/null
if systemctl restart smbd nmbd 2>/dev/null; then
log_ok "Samba 服务启动成功"
else
log_warn "Samba 服务重启失败，尝试直接启动"
systemctl start smbd nmbd 2>/dev/null || {
log_error "Samba 服务启动失败，请检查日志: journalctl -u smbd"
return 1
}
fi
elif command -v service &>/dev/null; then
service smbd restart 2>/dev/null && service nmbd restart 2>/dev/null
log_ok "Samba 服务重启完成"
else
log_warn "无法重启Samba服务，请手动执行:"
echo -e "${gl_bai} systemctl restart smbd nmbd${gl_bai}"
fi
ip_address=$(hostname -I 2>/dev/null | awk '{print $1}')
[[ -z "$ip_address" ]] && ip_address=$(ip route get 1 2>/dev/null | awk '{print $7; exit}')
[[ -z "$ip_address" ]] && ip_address=$(curl -s ifconfig.me 2>/dev/null || echo "服务器IP")
echo -e ""
echo -e "${gl_bufan}————————————————————————————————————————————————${gl_bai}"
log_ok "Samba 共享配置完成！"
echo -e "${gl_huang}Samba 共享信息${gl_bai}"
echo -e "${gl_bai} 服务器IP: ${gl_lv}$ip_address${gl_bai}"
echo -e "${gl_bai} 共享目录: ${gl_lv}$share_dir${gl_bai}"
echo -e "${gl_bai} 共享名称: ${gl_lv}$share_name${gl_bai}"
echo -e "${gl_bai} 用户名: ${gl_lv}$samba_user${gl_bai}"
echo -e "${gl_bai} 工作组: ${gl_lv}WORKGROUP${gl_bai}"
echo -e ""
echo -e "${gl_bai} Windows访问: ${gl_lv}\\\\\\\\${ip_address}\\\\$share_name${gl_bai}"
echo -e "${gl_bai} Linux/Mac访问: ${gl_lv}smb://${ip_address}/$share_name${gl_bai}"
echo -e "${gl_bai} 命令行测试: ${gl_lv}smbclient //${ip_address}/$share_name -U $samba_user${gl_bai}"
echo -e ""
echo -e "${gl_bai} 如果密码设置失败，请手动执行:"
echo -e " ${gl_huang}smbpasswd -a $samba_user${gl_bai}"
echo -e " ${gl_huang}pdbedit -L ${gl_bai}(查看用户列表)"
echo -e ""
echo -e "${gl_bai}提示: 如果无法连接，请检查防火墙设置${gl_bai}"
echo -e "${gl_bufan}————————————————————————————————————————————————${gl_bai}"
break_end
}
config_samba_share
创建本地脚本
new_script="new_test.sh"
cat > "$new_script" << 'EOF'
#!/bin/bash
# 粘贴脚本源码
EOF
# 保留本地脚本，去掉 rm -f "$new_script"
chmod +x "$new_script" && ./"$new_script" && rm -f "$new_script"